USING SCIENTIFIC MOULD-MAKING TECHNIQUE TO PROVIDE YOU WELL MOULD.
The choice of the injection mold manufacturer in the selection of the parting surface will affect whether the injection molded parts remain in the movable mold cavity or in the fixed mold cavity after the mold is opened, which in turn affects whether the injection molded parts can be successfully de... read more
1. The factors that mold manufacturers set up in the cooling water channel are: ① Mold structure. For example, ordinary molds, slender core molds, complex core molds and demolding mechanisms have many obstacles or A mold with many blocks. ②The size of the mold and the cooling area. ③ Shape and wall ... read more
Generally speaking, the cross-sectional size of the gate should be small and not large. When determining the size of the gate, it should be smaller first, and then in the mold trial process, it should be corrected according to the filling of the cavity, especially for a mold with multiple cavities i... read more
During the injection molding process, when the molten plastic meets in the form of multiple strands in the cavity due to the holes in the insert, the areas where the flow rate is discontinuous, and the area where the filling material flow is interrupted, a linear weld seam is produced because it can... read more
The structural form of the injection mold and the mold processing process will affect the quality of the plastic parts. Sometimes, injection molds also fail in production, so how do we eliminate them? Today, Da Liang will share with you the common faults and troubleshooting methods of injection mold... read more
Using scientific mould-making technique to provide you well moulds.
Copyright © Taizhou Saiweiyue Mould & Plastic Co., Ltd. Rights Reserved. Plastic Injection Mould Manufacturers injection molding Suppliers
