Application of Mold Structure Molding Traces on Injection Molding Samples

There are many practical applications for the mold structure and molding traces in the molding traces on the injection molded parts, including the application of its own holding point, and the application of the combination of the two. The specific application of traces can determine and verify the structure of the injection mold, overcome doubts and replicate the injection mold, and determine the components of the mold.
(1) Determine the mold structure on the injection molding sample Since the injection molding sample goes up the mold structure or shape trace, it is the impression left by the injection mold structure on the injection molding sample during the injection molding process, then the trace of the light mold structure molding is The injection mold structure is truly reflected on the annotation sample, and we can restore and determine the injection mold structure according to the common traces, and we can also carry out the feasibility analysis and demonstration of the injection mold structure scheme.
(2) Cloning, copying and repairing of injection molds Using the molding traces of the mold structure on the sample parts, the injection molds and injection molds can be cloned and copied, and the injection molds can also be repaired. The risk-free injection mold can draw CAD drawings and 3D modeling of the mold structure traces on the injection molding sample, and then perform the 3D modeling of the mold structure. It can also directly scan the mold structure traces of the injection molding sample. The prepared injection mold is the cloned mold, and the molded injection molded parts obtained by the Suzhou Plastic Processing Factory are the cloned products. And the error of trace surveying and mapping, 3D scanning does not even have the error of surveying and mapping, it will only cause a slight deviation in the size of the mold. Copy the injection fin mold. Through the direct 3D scanning of all mold components, the obtained injection mold is a copy. The mold, the obtained molded injection part is the copied product, so that the shrinkage rate of the mold size and the error of trace mapping have disappeared. This is the true copy of the mold and the product. Repairing the warped injection mold After scanning the damaged injection molding components, it is necessary to repair the three-dimensional modeling of the worn mold components, which is the repair process of the injection mold.
(3) Verify that the mold surface processing and inlay structure can determine the tool, grinding wheel, grinding, EDM and wire cutting and chemical corrosion used in the processing of the injection mold surface according to the texture of the mold surface processing, so as to determine the mold surface processing. process method.
(4) The dermatoglyphics of the sample parts manufactured by the dermatoglyphics are the same as the dermatoglyphics of the mold surface.
(5) Verification and verification of the injection mold structure scheme Since the molding traces of the mold structure on the injection-molded sample are the true reflection of the injection mold structure and processing on the injection-molded parts, it can be verified and verified according to the molding traces of the mold structure on the injection-molded sample. Check the injection mold structure scheme. In this way, with the physical evidence of the molding traces of the mold structure on the injection molding sample, it will be more confident in the designed mold structure scheme.

swymould.com